A-Premium Cruise Control Switch Assembly Compatible with Toyota & Lexus - 2001-2023 - Tacoma 4Runner Tundra RAV4 Sienna Avalon Camry Corolla & ES330 ES350 GS300 GS350 IS250 LX470, Replace# 84632-34011

2010 Toyota Camry - Install Cliff Notes: Tools Required: 10mm wrench/socket Flat head screwdriver #2 Phillips screwdriver T15 Torx bit (I used 1/4" drive) 3" long - 1/4" drive extension 1/4" drive ratchet 1.5 beers of your choice (optional tool) 1) Remove the negative battery cable (10mm wrench/socket) 2) Remove the plastic trim access panels around the cruise control switch and on the opposide side of the steering wheel (flat head screwdriver) 3) Put the key in the ignition and turn forward to unlock the steering wheel. Turn wheel 90 degrees to left and remove #2 Phillips screw holding right side steering wheel trim. #4) Turn wheel back to center, then 90 degrees to right and remove the other #2 Phillips screw holding left side steering wheel trim. #5) Pop off trim. It comes off in 2 pieces (top/bottom section) #6) Behind the access panels your popped off in Step #2, there is a T15 Torx screw. I used a 1/4" ratchet with short extension and T15 Torx bit to remove these. They ARE captive, so there is no worry about dropping them. This will releave the airbag in the center of the steering wheel. I left the wires to the airbag connected and had enough slack to put the airbag on top of the steering column. #7) Remove both #2 Phillips screws that mount the cruise control level to the steering wheel and pop off the clip for the wires. (squeeze/pull) #8) Install new cruise control lever and reinstall airbag and all trim pieces in reverse order. #9) Make sure you have no leftover parts, now re-install the negative battery cable. #10) Take for test drive, This honestly took me 23 minutes start/finish including a quick test drive. I tried following a crappy Youtube video and ended up figuring it out on my own. I could probably do another one in 15 minutes or less. It's really that easy! I installed this on my girlfriend's 2010 Toyota Camry. She has 278k miles on it and drives a LONG way to work every day, so cruise control is a must when you're beating down the highway. The price was excellent because it even included a wire harness and two spare screws. I ended up using the factory wire harness and screws since they were still in good shape. BUTTTTT if you lose a screw, it's nice that you have backups. This seems pretty stout and should last a long time. She's happy, I'm happy, and it was fairly simple to install. Just make sure you remove the negative battery cable before installing it so there's no chance of airbag deployment.

It fit perfectly and works great.

Easy peazy DIY. The car already has the OEM wiring for cruise; this switch kit is all you need. Add some ambition and a you tube video and VOILÀ, you're cruisin'. Works perfect.

Fixed my cruise control function not coming on

I installed this on my 2014 Toyota Tacoma Prerunner Base Model that has power windows & door locks but no steering wheel controls & no cruise control. The parts included with this work but there is one jumper wire for the airbag's ground that is not included and to purchase that wire is over $60.00 from Toyota - Once you have things apart (plenty of youtube videos available) you'll be able to see where the different wires go from what is in the truck and what comes with the purchase here - With that, you are able to modify/depin one of the jumpers to make one that works

Easy to install, works great

One star because the quality is alright not as sturdy but as close to oem as possible downside it only work on certain Toyota cars or trucks, suvs or vans, unfortunately it did fit my tundra but the functionality was never there but nice little prop to fill in the whole on the steering wheel buy at your own risk, it might work or it might be a prop for you as well.

Workes, Perfect fit.