MEIJIA IP67 Waterproof Hard Protective Case,Compact Hard Camera Case,Small Hard Case with Customizable Foam, Fit Use of Drones,Camera,Lens (Black, 11.65x8.35x3.78inches)

Great quality, robust construction, including hinges and latches. Foam insert good quality. Used as case for horse clippers. Can see it lasting longer than the clippers.

I have bought a few of these boxes in different sizes over the years and I've never been disappointed. They are built to last from a tough plastic that feels like it will last for years. The use cases are endless. I've used them for storing back up hard drives as well as my Go-Pro camera. The pick and Pluck protective foam makes it easy to adjust the shape to suit whatever you are looking to store. As far as size and storage are concerned, make sure you check the internal dimensions based on what you want to store rather than just the external dimensions. Add an extra 10mm all round to whatever space you need and you can't go too far wrong with the size you need. If you have anything delicate that you need to store away, or need a small protective travel case then I definitely recommend these every time.

If you are thinking of this as a watch case I can recommend it. I managed to fit 10 watches in. The foam has small square pre-cut sections. You can easily fully cut them out using your fingers. I found 3 squares wide and 4 squares down was the perfect size to fit a watch. The 3X4 part that you pull out is what you can strap your watch to. If I has any criticism it would be that it would be nice if the foam insert was a little sturdier. but for the money I cant complain.

As a Pelican alternative at a fraction of the cost, this case works well. Beware to check both the internal and external dimensions, though! I bought this originally for my Scarlett 2i2, having not read the internal dimensions, and was disappointed when it didn't fit, but I'm making use of it for my SM57 clones instead. The exterior is solid - I wouldn't expect this to fall apart any time soon. I wouldn't trust the rubber seal with heavy water exposure, but it should be good enough for most use cases. The foam is relatively low density, and the top/bottom layers aren't super thick, so this may not offer the most protection if you're dropping it off a building, but it'll certainly be better than nothing. The foam can be pulled out in cuboidal columns (~0.5x0.5x2in/1.5x1.5x5.4cm) to fit to the shape of whatever it is you want to keep in the case, but it's worth noting that these columns are not pre-cut halfway down or anything of the sort, so if you have an item that isn't particularly tall like an SM57, you'll want to lay some of the foam you take out sideways in the bottom to prevent your items from wiggling about, or manually cut the columns you remove in half. I've put pictures of how I did this below. The case also has two holes for padlocks, should you wish to use those (but they're of course not included). After reading some other reviews, people have said that the sizes are not as advertised. This is false - these people simply read the external dimensions and not the internal. Having measured the case, the advertised internal dimensions are correct. I will say, though, the useable dimensions are about an inch less in each direction due to requiring a layer of foam on the outside, but with some basic logic most people could figure that out. Overall, I would recommend this as a (relatively) cheap way to protect and store gear while travelling, with the caveat that you might need to get creative with your foam arrangement. Is it going to be as good as a Pelican case? Of course not, it's half the price... But it's good enough for me, so do with that what you will. And to reiterate: please, for the love of all that is holy, cross-reference the internal dimensions (seen in the product images or if you scroll down the product page) with your gear's dimensions. The dimensions listed in the product title are external. For reference, I will be purchasing one of Meijia's other cases, the 9.17inchx7.56inchx4.33inch model, for my 2i2 (this one should have the correct internal dimensions!). I imagine the quality will be the same, but I'll write a separate review for that when it comes.

Excellent little case, robust, water resistant, good seal and pressure relief valve filled with segmented foam.

I bought this to house my metal stamping equipment. The case feels sturdy and has some reassuring weight to it. The two clips snap shut the lid and it feels securely closed. The 3 piece foam layout is perfect, the lid and base have a fixed foam lining, the there is a block of foam 8n the middle that splits as required. It holds the items still inside. Overall it's good value for money and offers great protection for whatever you want to keep inside.

Great item and price

This box felt good, strong, and would definitely protect my remote. However, I got the inner dimensions out slightly, so a DJI Remote Pro 2 does not fit. I returned this and ordered the next size up, and it fits. Defo happy with the make, and construction, and I will be buying more

Very solid case - perfect for shock-resistant storage of a camera etc

Good quality , worth the mony

Dålig kvalitet

Sieht robust, hochwertig und funktional aus.

Tough, lightweight case with precut foam block. Make-you-own void space to fit your delicate items, and hold them securely. Good system, well made. Hinges and latches work fine. I use mine to protect my good Klipsch Nashville Bluetooth speaker. For that , I just took the foam block out and put the speaker inside; the foam layers in the interior top and bottom are all I need. It was a very snug fit at first, but the foam compacted over time to make a perfect fit. My Bluetooth speaker doesn't have a handle or a strap, but this case does have a handy handle for portability. I chose the bright yellow color so I can find it easily, but there are several color choices, or just black for incognito. Good value for the money. Protect your investments!