PD58 Internally Threaded Drop-In Anchor, Carbon Steel, Zinc Plated Finish, 7/8" Diameter, 3-13/16" Length, 5/8"-11 Threads (Pack Of 5)

• Drop-in anchor includes a wedge mechanism to create a secure hold within solid masonry and solid uncracked concrete.
• Anchor consists of a zinc-plated carbon steel body and wedge clip, which expands to secure the anchor in place.
• Meets 2000 International Building Code and 2000 International Residential Code specifications.
• Ultimate tensile strength is 16,500 lb. in 4,000-psi concrete.
• Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

The Wej-It PD58 POWER-Drop internally threaded drop-in anchor includes a wedge mechanism to create a secure hold within solid masonry and solid uncracked concrete, and meets 2000 International Building Code and 2000 International Residential Code specifications. The anchor body and wedge clip are made of corrosion-resistant zinc-plated carbon steel. The wedge clip expands within the drilled hole to secure the anchor in place. A safety shoulder above the clip provides support when the anchor is under severe strain. When installed, the anchor does not protrude from the drilled hole, enabling flush anchoring of an object to the ing surface. The anchor's allowable values may be increased 33.3% for short-term loading in resisting earthquake or wind loads. The included setting tool is externally threaded and has a washer and nut that can be placed to achieve a desired anchor depth. Once the setting tool has been threaded into the anchor and the anchor has been placed into the drilled hole, a hammer or mallet (sold separately) is used to drive the setting tool downward until the nut contacts the ing surface. Tightening the nut sets the anchor and releases the setting tool from the anchor. An item can be ed by inserting a threaded fastener (sold separately) through it and into the anchor. SpecificationsAnchorDrill DiameterMin. Hole DepthMin. Embedment DepthRecommended Installation Torque, ft.-lb.Installation TurnsUltimate Tensile Strength in 4,000-psi ConcreteUltimate Shear Strength in 4,000-psi ConcretePD381/2"3"2-5/8"252-1/26,409 lb.4,200 lb.PD125/8"4"3-15/32"552-1/210,352 lb.7,340 lb.PD587/8"5"4-5/16"90316,500 lb.11,880 lb.PD341"5-3/4"5-1/4"175421,409 lb.13,360 lb.PD11-1/4"6-1/2"5-3/4"290324,752 lb.26,440 lb. Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the specifications sheet. Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes. Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT. What's in the Box? ------------------ * 5 Wej-It PD58 anchors * 1 installation tool